How To Light A Pilot Light On A Carrier Furnace. If the knob won't go in, fiddle with it until it does. If your pilot light goes out, all you need to.
Take out the old air filter and replace it with a new one. How to relight a pilot light: To locate the pilot light on a gas furnace, you first have to remove the access cover, which usually just lifts off.
Cranney Home Services Has Been In The Business For More Than 35 Years, And We've Seen Every Type Of Furnace Out There.
Turn the knob on your furnace to “off.”. Take out the old air filter and replace it with a new one. If your pilot light goes out, all you need to.
Turn The Knob To “Pilot,” And Let Gas To Flow To The Pilot.
Push in the knob and hold it in. Instead, what you have is most likely what's called a direct. Set the central furnace thermostat to off or the lowest temperature option.
Use A Lighter To Light Your Pilot Light.
Turn the control knob to “pilot”. Set the pilot light dial to “off”. Light a lighter or match, then push in the reset button.
It May Take A Couple.
Pilot light doesn't light on a carrier 58ss furnace. (btu/h) nominal cooling capacity (tons) gmnt =. If all systems are working, then you’re ready to try to light the pilot.
Once The Gas Has Had Time To Dissipate, Turn The Knob To “Pilot.” Then, Hold Down The “Reset” Button And Bring The Flame Of A Long Lighter Close To The.
How do you turn your furnace pilot light on? Take your lighter and light the pilot light within the pilot opening of your furnace while holding the. The furnace's pilot light is usually positioned at the bottom of the unit by a knob.